Table of Contents
Advertisement
Logging Raw Data
Case of Static
Survey in
Standalone
Deleting Raw Data Files
72
When static surveys are performed without the field terminal
and FAST Survey, you must be careful with raw data file
names. In view of the ATOM naming conventions used and
the system's default settings, there is indeed every chance
that the base file and the rover file have the same name.
Magellan then recommends you follow this procedure:
1. Download the raw data file from one of the receivers to the
USB device.
2. Plug the USB device to the office computer, copy the raw
data file to the project folder and rename the file to reflect
the site where the static occupation took place (e.g.
replace "G____" with "GPREF")
3. Repeat the previous two steps with the other receiver,
using a different name for the file (e.g. replace "G____"
with "GP100").
Use FAST Survey to delete raw data files from the receiver
internal memory.
1. Tap on the Survey tab and then on Log Raw GPS.
2. Tap on File Manager. The screen displays the following
parameters:
• List of raw data filenames.
• Selected storage medium.
• Free memory available.
• Current number of raw data files in memory.
3. Unless already done, select Internal Mem to list the files
stored in the internal memory.
4. To delete one file, highlight its name in the list and tap the
Delete button. To delete all the files, tap Delete All Files.
Important! When the receiver is logging raw data, the file
being logged cannot be deleted. The file is protected from
deletion until you close it.
Advertisement
Table of Contents
