Anh: Antenna Height; Anp: Antenna Parameters - Magellan ProFlex 500 Reference Manual

ANH: Antenna Height

Function
Command Format
Response Format
Example
Relevant Set
Command
See also

ANP: Antenna Parameters

Function
Command Format
This command allows you to read the entered antenna height
as well as the measurement type used.
Syntax
$PASHQ,ANH[*cc]
Syntax
$PASHR,ANH,f1,c2*cc
Parameters
Parameter
f1 Antenna height.
Antenna height measurement type:
c2 • V: Vertical measurement
• S: Slant measurement
*cc Checksum
$PASHQ,ANH
$PASHR,ANH,1.568,S*44
$PASHS,ANH
$PASHQ,ANR
This command allows you to read the antenna parameters of
the specified antenna name, or of the complete antenna
database if no antenna name is specified.
Syntax
$PASHQ,ANP[*cc]
or
$PASHQ,ANP,s1[*cc]
Description
(slant measurement, H=1.568 m)
Query Command Library
Range
0-6.553 m
V, S
*00-*FF
185