Table of Contents
Advertisement
FAST Survey Field Software
Registering as a FAST Survey User
How to Register
30
see if additional steps are needed to complete the
installation.
• Click OK, then Finish to complete installation on computer
side.
• On the field terminal the installation phase has
automatically started. When the progress bar disappears
from the screen, this means installation is complete. The
FAST Survey icon can then be seen on the screen.
The first time you start FAST Survey, you will be prompted to
register your license of the software. If you do not register,
FAST Survey will remain in demo mode, limiting each job file
to a maximum of 30 points.
FAST Survey registration is done via the Internet at the
following address:
Magellan FAST Survey Registration
Choose Yes to start the registration process. You will be
required to enter the following information:
• User Name
• Company Name
• Serial Number*
• Email Address
• Phone Number
• Fax Number
• Hardware ID#1*
• Hardware ID#2*
• Reason for Install
• Registration Code*
*: Select Equip>About Magellan Fast Survey>Change Registration
in FAST Survey to read this information.
After you submit this information, your change key will be
displayed and emailed to the address that you submit. Keep
this for your permanent records. You may then enter the
manufacturer and model of your equipment.
If you do not have access to the Internet, you may fax the
above information to (+1) 606-564-9525. Your registration
information will be faxed back to you within 48 hours. During
this time, you may continue to use the program without
restriction. After you receive your Change Key, enter it and tap
Advertisement
Table of Contents
