Set Command Library
RAW,PER: Setting Unique Output Rate for Raw Data
Function
Command Format
Relevant Query
Command
See also
164
This command is used to set the same output rate for raw
data. This command will overwrite all the output rates set
individually for each message type using $PASHS,RAW,xxx.
Syntax
$PASHS,RAW,PER,f[*cc]
Parameters
Parameter
Description
f
Output rate, in seconds
*cc
Optional checksum
Example
Setting the output rate to 2 seconds:
$PASHS,RAW,PER,2*44
$PASHQ,RAW
$PASHS,RAW
$PASHS,RAW,ALL
Range
Default
0.1-0.9 s
1 s
1-999 s
*00-*FF