Wak: Acknowledging Alarms - Magellan ProFlex 500 Reference Manual

WAK: Acknowledging Alarms

Function
Command Format
Relevant Query
Command
This command is used to acknowledge all alarms. This will
also turn off the beeper (if previously allowed to beep on
occurrence of an alarm). Basically all alarms will switch from
the "current" to the acknowledged ("pending") status.
Syntax
$PASHS,WAK[*cc]
Parameters
None.
Example
Acknowledging all alarms:
$PASHS,WAK*28
$PASHQ,WARN
Set Command Library
181