Table of Contents
Advertisement
RDP,CHT: Radio Channel Table
Function
Command Format
Response Format
This command is used to read the radio channel settings.
Syntax
$PASHQ,RDP,CHT,c1[*cc]
Parameters
Parameter
Serial port used to communicate with the radio (A, B
c1
or F for external radio, D for internal radio)
*cc
Optional checksum
Syntax
$PASHR,RDP,CHT,s1,d2,n(d3,f4,f5)*cc
Or, if the channel table does not exist: $PASHR,RDP,CHT,s1,0
(Here n=d2)
Parameters
Parameter
Radio Model:
• NONE
s1
• MGL: Magellan UHF
• PDL: Pacific Crest
d2
Total number of available channels
d3
Channel index
f4
Receive frequency
f5
Transmit frequency
*cc
Checksum
Comment
The number of (d3,f4,f5) data sets in the response line is
equal to the number of channels (d2).
Examples
$PASHQ,RDP,CHT,D
$PASHR,RDP,CHT,PDL,7,0,446.7750,446.7750,1,444.1000,444.1000,2,445.
1000,445.1000,3,446.1000,446.1000,4,447.1000,447.1000,5,448.1000,448.1
000,6,449.1000,449.1000*35
$PASHQ,RDP,CHT,A
$PASHR,RDP,CHT,NONE,0*7B
Description
Description
Query Command Library
Range
A, B, F, D
*00-*FF
Range
NONE, MGL, PDL
0-16
0-15
410-470 MHz
410-470 MHz
*00-*FF
245
Advertisement
Table of Contents
