Radio Data Link Fails To Provide Base Corrections To Rover - Magellan ProFlex 500 Reference Manual

Step 3. Is the
Currently Used
Memory Full?

Radio Data Link Fails to Provide Base Corrections to Rover

• Connect a USB stick to the receiver through the USB
device cable provided and press the Log button again.
• Restore the default settings (by pressing the
Log+Scroll+Power buttons simultaneously) in order to
make the internal memory the active memory. Press
the Log button again.
If neither of these two actions resolves your problem, go to
step 3.
2. If you are using FAST Survey to control the receiver, select
the Survey menu. Tap on the Log Raw GPS button and then
on the File Manager button. Select the memory where you
want the raw data file to be created (Internal Mem or USB
Mem Stick). Come back to the previous screen and tap on
the Start File button. If the problem is not yet resolved, go
to step 3.
Data logging will stop automatically or won't start if the
storage medium used (internal memory or USB stick) is full.
On the General Status screen, read the remaining percentage
of free memory (second line, last number in the line).
1. If "0%" is displayed, then the memory used is full. Do one
of the following:
• Change the storage medium
• Using $PASHS,FIL,D or FAST Survey, empty the
memory or delete the files you don't need anymore.
If neither of these two actions resolves your problem, you
may have a malfunctioning receiver. Contact your local
dealer or email Magellan Technical Support for
assistance.
2. If the memory is not full (>0%), you may have a
malfunctioning receiver. Contact your local dealer or email
Magellan Technical Support for assistance.
RTK Base
Relevant to
RTK Rover PP Base
•
Troubleshooting
PP Rover
357