Table of Contents
Advertisement
RTK Configuration Steps
Network Connection
50
Other screens are available from within the Monitor/Skyplot
function showing the details of the constellation, of the
base position and of the RTK position solution:
In NTRIP and Direct IP modes, a Disconnect/Connect
button is available on the Ref tab to easily control the
network connection. There is also a horizontal bar showing
the GSM signal level until the modem is on-line. The bar
disappears when the modem is online.
In Direct Dial mode, a Hang up button is available on the
same tab to terminate the connection with the base.
• Tap
after you have made sure the FIXED position
status is settled. This takes you back to the FAST Survey
menu from which you can start your survey.
From the GPS Rover's RTK tab, do the following to choose, set
and activate a network connection.
Advertisement
Table of Contents
