Pwr: Power Status - Magellan ProFlex 500 Reference Manual

Query Command Library

PWR: Power Status

Function
Command Format
Response Format
See also
242
This command is used to query the power status of the
receiver.
Syntax
$PASHQ,PWR[*cc]
Syntax
$PASHR,PWR,PAR,f1,f2,d3,f4,d5,f6,d7,d8*cc
Parameters
Parameter
Battery voltage threshold, in volts, triggering a low-bat-
f1
tery alarm
External power voltage threshold, in volts, triggering a
f2
low-power alarm
Power source:
• 0: Internal battery
d3
• 1: External battery
• 2: External DC source
f4 Battery DC output voltage, in volts
d5 Percentage of remaining battery energy
f6 DC input voltage from external power, in volts
Battery charging status:
• 0: Charging
d7
• 1: Discharging
• 2: Fully charged
d8 Internal temperature, in °Celsius
*cc Checksum
Example
$PASHQ,PWR
$PASHR,PWR,6.8,9.1,2,,,11.6,,44*0D
$PASHS,PWR,PAR
Description Range
6.7-8.4
9.0-28.0
0-2
0.0-12.0
0-100
0.0-30.0
0-2
*00-*FF