Mwd: Modem Watchdog Timeout - Magellan ProFlex 500 Reference Manual

Query Command Library

MWD: Modem Watchdog Timeout

Function
Command Format
Response Format
Relevant Set
Command
See also
228
This command is used to query the current setting for the
modem watchdog timeout.
If no data is received or sent through its port over a period of
time equal to this timeout, the modem will automatically
hang up.
Syntax
$PASHQ,MWD[*cc]
Syntax
$PASHR,MWD,d1,d2*cc
Parameters
Parameter
Current timeout setting:
d1 • 1-99: Modem timeout in minutes.
• 0: No timeout
d2 Current idle time for modem, in minutes.
*cc Checksum
Example
$PASHQ,MWD
$PASHR,MWD,0*36
$PASHS,MWD
$PASHQ,MDM
Description Range
0-99
0-99
*00-*FF