Ant: Antenna Height - Magellan ProFlex 500 Reference Manual

Query Command Library

ANT: Antenna Height

Function
Command Format
Response Format
Example
Relevant Set
Command
See also
188
This command is used to read the current setting for the
antenna height.
Syntax
$PASHQ,ANT[*cc]
Syntax
$PASHR,ANT,f1,f2,f3,m4,f5*cc
Parameters
Parameter
Slant height measurement, from ground mark to
f1
antenna edge (SHMP)
Antenna radius: horizontal distance from the
f2
geometrical center to the antenna edge.
Antenna vertical offset:
• Offset between SHMP and ARP if both slant
height measurement and antenna radius are dif-
f3
ferent from zero.
• Offset between ground mark and ARP if either
slant height measurement or radius is zero.
Horizontal azimuth [dddmm.mm], in degrees, for
the horizontal line connecting the ground mark to
m4
the surveyed point, measured with respect to the
Geographical North.
Horizontal offset from the ground mark to the sur-
f5
veyed point.
*cc Checksum
$PASHQ,ANT
$PASHR,ANT,0,0,2.000,0,0*49
$PASHS,ANT
$PASHQ,ANR
$PASHQ,ANH
Description
(vertical, 2.000 m)
Range
0-6.553 m
0-6.553 m
± 0-6.553 m
0-35959.99
0-6.553 m
*00-*FF