Ptt: Pps Time Tag - Magellan ProFlex 500 Reference Manual

PTT: PPS Time Tag

Function
Command Format
Response Format
This command asks for the PPS time tag message to be
output on the specified port, or on the port on which the
query is made if no port is specified.
Syntax
$PASHQ,PTT[,c1][*cc]
Parameters
Parameter
c1 Port ID
*cc Optional checksum
Syntax
$PASHR,PTT,d1,m2*cc
Parameters
Parameter
Day of week:
d1 • 1: Sunday
• 7: Saturday
m2 GPS time tag in hours, minutes, seconds 0-23:59:59.9999999
*cc Checksum
Example
$PASHQ,PTT
$PASHR,PTT,6,20:41:02.0000000*2D
Comments
• The response to this command will be sent out once, right
after the next PPS pulse is generated.
• The response contains the GPS time at which the PPS
pulse was sent, including the offset if an offset was set
when the PPS pulse was enabled.
• Being set to a periodical output by the $PASHS,NME,PTT
command, this message is independent of the NMEA
period. It is only linked to the PPS period.
Description
A, B, C, E, F, I
*00-*FF
Description
Query Command Library
Range
Range
1-7
*00-*FF
241