Table of Contents
Advertisement
ANR: Antenna Reduction Mode
Function
Command Format
Response Format
Example
Relevant Set
Command
See also
This command is used to read the current setting for the
antenna reduction mode. This setting defines the physical
location on the system for which the position is computed.
Syntax
$PASHQ,ANR[*cc]
Syntax
$PASHR,ANR,s1*cc
Parameters
Parameter
Antenna reduction mode:
• OFF: The computed position is assumed to be the
location of the antenna's L1 phase center.
s1
• ON: The computed position is assumed to be the
location of the ground mark.
• ARP: The computed position is assumed to be the
location of the Antenna Reference Plane (ARP).
*cc
Checksum
$PASHQ,ANR
$PASHR,ANR,ON*04
$PASHS,ANR
$PASHS,ANH
Description
Query Command Library
Range
OFF, ON,
ARP
*00-*FF
187
Advertisement
Table of Contents
