Pps: Pps Settings; Prt: Baud Rate Settings - Magellan ProFlex 500 Reference Manual

Relevant Set
Command
See also

PPS: PPS Settings

Function
Command Format
Response Format
Relevant Set
Command

PRT: Baud Rate Settings

Function
$PASHR,POS,3,10,151858.00,4717.960848,N,00130.499487,W,82.972,,0.0,
0.0,-0.0,2.0,1.1,1.7,1.3,G010*49
$PASHS,POS
$PASHS,NME
This command is used to read the current settings (signal
period, offset and valid edge) of the PPS signal.
Syntax
$PASHQ,PPS[*cc]
Syntax
$PASHR,PPS,f1,f2,c3*cc
Parameters
Parameter
Active edge:
f1 • R: Rising
• F: Falling
f2 Offset from ??, in milliseconds
c3 Valid edge
*cc Checksum
Example
$PASHQ,PPS
$PASHR,PPS,1,500,R*5D
$PASHS,PPS
This command is used to query the baud rate setting for each
of the serial ports used in the receiver.
Description
0
0
R
Query Command Library
Default Range
0.0-0.9; 1-60
±999.9999
R, F
*00-*FF
239