Changing The Radio Module; Installing A Sim Card; Configuring Serial Port A - Magellan ProFlex 500 Reference Manual

Changing the Radio Module

Installing a SIM Card

Configuring Serial Port A

This operation requires special technical skills. It should be
performed by a certified dealer. Opening the receiver case
without been authorized will automatically cancel the
guarantee.
• Open the battery compartment by turning the quarter-turn
finger screw anticlockwise.
• Remove the battery.
• Insert the SIM card as shown below.
• Put the battery back in the compartement and close the
trap door.
• Set up your equipment in such a way that it can
successfully receive and process a serial command sent
from outside the equipment. See Applying Serial
Commands on page 176 in this manual to know how this
can be done.
• Use the $PASHS,MDP serial command to configure serial
port A as an RS232 or RS422 port. Refer to MDP: Setting
Port A to RS232 or RS422 on page 215 in this manual to
learn how to use this command.
• Use the $PASHS,CTS command to enable/disable
hardware handshaking. Refer to CTS: Handshaking on
page 200.
1
2
Miscellaneous
377