Bas: Differential Data Type - Magellan ProFlex 500 Reference Manual

Set Command Library

BAS: Differential Data Type

Function
Command Format
Relevant Query
Command
See also
112
This command is used in a base to select the type of
differential data the base should generate and the port, or two
ports, through which this data should be routed.
Syntax
$PASHS,BAS,c1,s2[,c3,s4][*cc]
Parameters
Parameter
First port ID:
• A, B, F: Serial port (A: default)
• C: Bluetooth port
c1
• I: Ethernet port
• E: Modem
• M, U: Memory
Differential data type:
• RT2: RTCM 2.3 messages
s2 • RT3: RTCM 3.0 & 3.1 messages (default)
• CMR: CMR messages
• CMP: CMR+ messages
c3 Second port ID: same as c1 above
s4 Differential data type: same as s2 above.
*cc Optional checksum
Examples
Sending RTCM 3.0 message to the external UHF transmitter
via port A:
$PASHS,BAS,A,RT3*51
Sending RTCM 2.3 messages to the external UHF transmitter
via port D and CMR+ messages to the GSM modem via port E:
$PASHS,BAS,D,RT2,E,CMP*4E
$PASHQ,BAS
$PASHS,CPD,MOD
$PASHS,RTC,TYP
Description Range
A, B, C, E, F, I, M,
U
RT2, RT3, CMR,
CMP
A, B, C, E, F, I, M,
U
RT2, RT3, CMR,
CMP
*00-*FF