Eth: Ethernet Status And Parameters - Magellan ProFlex 500 Reference Manual

Query Command Library

ETH: Ethernet Status and Parameters

Function
Command Format
Response Format
Example
See also
214
This command is used to read the current status of the
Ethernet port as well as all the parameters relevant to this
port.
Syntax
$PASHQ,ETH[*cc]
Syntax
$PASHR,ETH,c1,s2,s3,DHP=s4,ADD=s5,MSK=s6,GTW=s7,NMS=s8,
DN1=s9,DN2=s10*cc
Parameters
Parameter
c1 Ethernet port ID
s2 Ethernet status
s3 MAC address (xx:xx:xx:xx:xx:xx)
DHP=s4 DHCP mode
ADD=s5 IP address
MSK=s6 Sub-network mask
GTW=s7 Gateway IP address
NMS=s8 Name server
DN1=s9 DNS 1 IP address
DN2=s10 DNS 2 IP address
*cc Checksum
$PASHQ,ETH
$PASHR,ETH,I,ON,02:03:04:85:06:07,DHP=1,ADD=10.20.2.28,MSK=255.25
5.255.0,GTW=10.20.2.1,NMS=magellangps.com,DN1=134.20.2.16,DN2=134
.20.2.3*47
$PASHS,ETH,ON
$PASHS,ETH,OFF
$PASHS,ETH,PAR
Description Range
I
OFF, ON
17 characters
0, 1
0.0.0.0-255.255.255.255
0.0.0.0-255.255.255.255
0.0.0.0-255.255.255.255
Up to 64 characters
0.0.0.0-255.255.255.255
0.0.0.0-255.255.255.255
*00-*FF