Ntr,Mtp: Connecting Receiver To Ntrip Caster Mount Point - Magellan ProFlex 500 Reference Manual

NTR,MTP: Connecting Receiver to NTRIP Caster Mount Point

Function
Command Format
Relevant Query
Command
See also
This command allows you to connect the receiver to a NTRIP
caster mount point.
Syntax
$PASHS,NTR,MTP,s[*cc]
Parameters
Parameter
s NTRIP mount point or OFF command
*cc Optional checksum
Example
Connecting to mount point MUWF0:
$PASHS,NTR,MTP,MUWF0*4D
If the connection is successful, the following response line
will be returned:
$PASHR,NTR,OK*cc
If the connection failed, the following response line will be
returned:
$PASHR,NTR,FAIL*12
None.
$PASHQ,NTR,TBL
Description
Set Command Library
Range
100 characters max or
"OFF"
*00-*FF
151