Pem: Setting The Position Elevation Mask; Phe: Setting The Active Edge Of The Event Marker Pulse - Magellan ProFlex 500 Reference Manual

PEM: Setting the Position Elevation Mask

Function
Command Format
Relevant Query
Command
See also

PHE: Setting the Active Edge of the Event Marker Pulse

Function
Command Format
This command is used to set the elevation mask used in the
position processing.
Syntax
$PASHS,PEM,d1[*cc]
Parameters
Parameter
d1 Elevation mask angle, in degrees
*cc Optional checksum
Example
Setting the elevation mask to 15 degrees:
$PASHS,PEM,15*05
$PASHQ,PEM
$PASHS,ELM
This command is used to set the active edge of the event
marker pulse used in photogrammetry time-tagging.
Syntax
$PASHS,PHE,c1[*cc]
Description
Set Command Library
Range Default
0-90° 5
*00-*FF
155