Table of Contents
Advertisement
RDP,TYP: Defining the Type of Radio Used
Function
Command Format
Relevant Query
Command
See also
This command is used to set the type of radio connected to
the specified port.
Syntax
$PASHS,RDP,TYP,c1,s2[*cc]
Parameters
Parameter
ID of port connected to the radio you want
c1
to set.
Radio Model:
• MGL: Magellan UHF
• PDL: Pacific Crest PDL RXO
s2
• UNKNOWN: Automatic detection of
the type of internal radio used on port
D
*cc
Optional checksum
Examples
Auto-detecting the internal radio receiver:
$PASHS,RDP,TYP,D,UNKNOWN*4E
Setting the external radio as a Magellan U-Link transmitter:
$PASHS,RDP,TYP,A,MGL*45
$PASHQ,RDP,TYP
$PASHS,RDP,PAR
$PASHS,RDP,ON
$PASHQ,RDP, OFF
Description
Set Command Library
Range
A, B, D, F
PDL, MLG (if port A
used),
PDL (if port D used),
UNKNOWN
*00-*FF
169
Advertisement
Table of Contents
