Table of Contents
Advertisement
Chapter 9. Set Command Library
ANH: Antenna Height
Function
Command Format
Relevant Query
Command
See also
This command allows you to enter the antenna height when
measured according to the vertical measurement type. Even
if not specified explicitly, the height measurement type will
always be "Vertical".
Syntax
$PASHS,ANH,f1[,c2][*cc]
Parameters
Parameter
f1
Antenna height.
Antenna height measurement type (V
c2
for "Vertical")
*cc
Optional checksum
Example
Entering the vertical measurement (2 m) of a rover antenna:
$PASHS,ANH,2.000
$PASHQ,ANH
$PASHS,ANR
$PASHS,ANT
Description
Range
0-6.553 m
V
*00-*FF
101
Advertisement
Table of Contents
