Mdm,Lvl: Modem Signal Level; Mdp: Port A Setting - Magellan ProFlex 500 Reference Manual

MDM,LVL: Modem Signal Level

Function
Command Format
Response Format
See also

MDP: Port A Setting

Function
Command Format
Response Format
This command is used to query the current level of the
modem signal.
Syntax
$PASHQ,MDM,LVL[*cc]
Syntax
$PASHR,MDM,LVL,d*cc
Parameters
Parameter
Current signal level:
• 0-100: Signal level. The higher the number, the
d
higher the signal level.
• "-1": No signal available.
*cc Checksum
Example
$PASHQ,MDM
$PASHR,MDM,LVL,-1*7A
$PASHQ,MDM
This command is used to read the current setting of port A.
Syntax
$PASHQ,MDP[*cc]
Syntax
$PASHR,MDP,A,s*cc
Description
Query Command Library
Range
0 to 100
-1
*00-*FF
225