Warn: Warning Messages - Magellan ProFlex 500 Reference Manual

Query Command Library

WARN: Warning Messages

Function
Command Format
Response Format
268
This command is used to list the possible warning messages
stored in the receiver.
Syntax
$PASHQ,WARN[*cc]
Syntax
$PASHR,WARN,s1,s2*cc
Parameters
Parameter
Warning message label
s1
NONE: No warning message
Status:
• Pending: Alarm acknowledged
s2 • Current: Alarm not acknowledged yet
• Occurred: An error condition was detected
earlier but has vanished since then
*cc Checksum
Software error
Unknown command
Bad parameter
Bad command checksum
File open error
File close error
File write error
File read error
File system mount error
GSM connection failed
GSM initialization failed
GSM data read error
GSM data write error
GSM network error
GSM power error
USB removed while file opened
File transfer Error
Description
Alarm Label
Range
See table below
PENDING,
CURRENT,
OCCURRED
*00-*FF