Table of Contents
Advertisement
Set Command Library
REC: Enable/Disable, Start/Stop Raw Data Recording
Function
Command Format
Relevant Query
Command
See also
170
This command allows you to enable, disable, start or stop raw
data recording. Raw data is recorded in the memory you
selected with the $PASHS,MEM command.
Syntax
$PASHS,REC,c[*cc]
Parameters
Parameter
Control character:
• Y: Yes. The receiver will immediately start
recording data. This option also enables data
recording at receiver power-up, i.e. recording will
start every time you turn the receiver on, even if
you stopped recording before the end of the pre-
vious session.
• N: No. The receiver will immediately stop record-
ing data. This option also disables data recording
c
at receiver power up, i.e. the receiver won't
resume data recording when you next turn it on.
This is the default mode.
• S: Stop. The receiver will immediately stop
recording raw data. This option does not affect
the way the receiver operates at power-up.
• R: Restart. The receiver will immediately start
recording raw data. This option does not affect
the way the receiver operates at power-up.
*cc
Optional checksum
Examples
Starting raw data recording:
$PASHS,REC,Y*54
Stopping raw data recording:
$PASHS,REC,N*43
$PASHQ,REC
$PASHS,MEM
$PASHS,ATM
Description
Range
Y, N, S, R
*00-*FF
Advertisement
Table of Contents
