Cpd,Afp: Setting The Confidence Level Of Ambiguity Fixing - Magellan ProFlex 500 Reference Manual

CPD,AFP: Setting the Confidence Level of Ambiguity Fixing

Function
Command Format
Relevant Query
Commands
This command is used to set the confidence level required of
the ambiguity fixing process. The higher the confidence level,
the more likely the ambiguities are fixed correctly, but the
longer the time it takes to fix them.
Syntax
$PASHS,CPD,AFP,f1[*cc]
Parameters
Parameter
Confidence level, in percent, required
of ambiguity fixing process.
f1 Choosing "0" means the receiver will
not try to fix ambiguities but instead will
stay indefinitely in Float mode.
*cc Optional checksum
Example
Setting the confidence level to 99.9%:
$PASHS,CPD,AFP,99.9*62
$PASHQ,CPD,AFP
$PASHQ,CPD
Description
Set Command Library
Range Default
0, 95.0, 99.0,
99.0
99.9
*00-*FF -
117