Table of Contents
Advertisement
Downloading Raw Data
Using a USB Mass
Storage Device
Using the USB
Cable Provided
Use a USB mass storage device as a transit storage medium
to download raw data files from the receiver's internal
memory to your office computer.
Important! During a download operation, files are not deleted
from the receiver but simply copied to the USB mass storage
device.
After downloading the files to this device, connect the USB
device to your computer and use your usual browser to copy
the files to the project folder.
• Connect the USB mass storage device to the receiver via
the short USB Device cable provided (P/N 702103).
If raw data files are present in the receiver's internal
memory, the following icons will automatically appear on
the display screen:
• To confirm the file transfer, press the Log button. The
General status screen will re-appear after the file transfer
is complete.
• To cancel the file transfer, press the Scroll button.
• If you do not press any button within the next 10 seconds,
the download procedure will be canceled automatically
and the screen will come back to the previous display.
• Connect the USB cable provided (P/N 702104) between
the office computer and the receiver's USB port. The
receiver is then seen as a USB device from the office
computer
• Using Windows Explorer on your office computer, browse
the receiver's internal memory for the raw data files.
• Copy/paste the files to your project folder. Note that raw
data files can directly be deleted from the receiver's
internal memory through this connection.
Logging Raw Data
71
Advertisement
Table of Contents
