Anp,Pco & Anp,Edx: Creating/Editing Antenna Definitions - Magellan ProFlex 500 Reference Manual

Set Command Library
ANP,PCO & ANP,EDx: Creating/Editing Antenna Definitions
Function
Command Format
Relevant Query
Command
102
These commands allow you to create or modify antenna
definitions. The definition of an antenna includes a name for
the antenna, all its phase center offsets as well as the
elevation-dependent delays (in 5-degree steps).
Syntax
$PASHS,ANP,PCO,s1,f1,f2,f3,f4,f5,f6,f7[*cc]
$PASHS,ANP,ED1,s1,f1,f2,f3,f4,f5,f6,f7,f8,f9,f10,... ,f19,f20[*cc]
$PASHS,ANP,ED2,s1,f1,f2,f3,f4,f5,f6,f7,f8,f9,f10,... ,f19,f20[*cc]
Parameters
ANP,PCO (PCO for Phase Center Offsets)
Parameter
f1 Antenna name
f2 L1 phase center offset, in mm, in the North direction
f3 L1 phase center offset, in mm, in the East direction
f4 L1 phase center offset, in mm, in the vertical direction ±0-1000.0
f5 L2 phase center offset, in mm, in the North direction
f6 L2 phase center offset, in mm, in the East direction
L2 phase center offset, in mm, in the vertical (up)
f7
direction
*cc Optional checksum
ANP,EDx (EDx for L1 and L2 Elevation Dependent delays)
Parameter
f1 Antenna name
Elevation-dependant delays, in mm, for elevations
f2-f20
from 90 to 0 degrees, in 5-degree steps.
*cc Optional checksum
Example
Setting the PCO parameters for antenna ASH8987:
$PASHS,ANP,PCO,ASH8987,0,0,110,0,0,128*29
$PASHQ,ANP
Description
Description
Range
31 charac-
ters max.
±0-1000.0
±0-1000.0
±0-1000.0
±0-1000.0
±0-1000.0
*00-*FF
Range
31 charac-
ters max.
±0-1000.0
*00-*FF