Table of Contents
Advertisement
ANT: Antenna Height
Function
Command Format
This command is used to define the antenna height,
especially when it was determined using the slant
measurement method. However, a vertical measurement can
also be entered through this command.
Using the $PASHS,ANT command overwrites all previous
settings performed with the $PASHS,ANH command.
Syntax
$PASHS,ANT,f1,f2,f3[,m4,f5][*cc]
Diagrams and Definitions
Slant Measurement
GM
N
GM
• ARP: Antenna Reference Point (usually bottom of the
antenna).
• SHMP: Slant Height Measurement Point (usually at the
hedge of the antenna, above the ARP).
• Ground Mark (GM): above the ARP (same horizontal
coordinates).
• Survey Point (SP): same height as Ground Mark but with
a horizontal offset.
Vertical Measurement
f2
SHMP
f3
ARP
f1
f3
SP
GM
N
m4
GM
SP SP
f5
Set Command Library
SP
m4
SP SP
f5
107
Advertisement
Table of Contents
