Table of Contents
Advertisement
Set Command Library
CTS: Handshaking
Function
Command Format
Relevant Query
Command
See also
124
This command enables or disables the RTS/CTS handshaking
protocol for the specified port. If no port is specified, the
command applies to the port through which the command is
routed.
Syntax
$PASHS,CTS,[c1],s2[*cc]
Parameters
Parameter
c1
Port ID
s2
RTS/CTS control (default: ON)
*cc
Optional checksum
Example
Disabling RTS/CTS on port A:
$PASHS,CTS,A,OFF*3F
$PASHQ,CTS
$PASHS,PRT
$PASHS,MDP
Description
A, B, F
ON, OFF
*00-*FF
Range
Default
ON
Advertisement
Table of Contents
