Table of Contents
Advertisement
Display Screens
Power-On Screen
General Status
Screen
If you press the Scroll button several times, you will see the
following displays successively.
When you power on the receiver, the Magellan Professional
logo appears on the screen. It is displayed until the receiver
has completed its auto-test (this takes about 30 seconds).
Then the General Status screen is displayed.
An example of General Status screen is shown below.
[1]
[5]
[6]
[9]
This screen displays the following information:
•
: Satellite icon [1] (always displayed).
• Number of satellites tracked [2].
• Position solution status [3]:
– NONE: Position not available
– AUTO: Autonomous GPS position
– DGPS: Differential GPS position
– FLOAT: Float solution
– FIXED: Fixed solution (RTK is operational)
– BASE: This receiver is configured as a base.
[2]
[3]
[10]
[11]
[12] [13]
Introduction
[4]
[8]
[7]
13
Advertisement
Table of Contents
