ATM,PER: Setting Unique Output Rate for all ATOM Messages
Function
Command Format
Relevant Query
Command
See also
This command is used to set the same output rate for all
ATOM messages. This command will overwrite all the output
rates set individually for each message type using
$PASHS,ATM,xxx.
Syntax
$PASHS,ATM,PER,f[*cc]
Parameters
Parameter
f
Output rate
*cc
Optional checksum
Example
Setting the output rate to 1 second:
$PASHS,ATM,PER,1*5B
$PASHQ,ATM
$PASHS,ATM
Description
Set Command Library
Range
0.1-0.9 s
1-999 s
*00-*FF
111