Table of Contents
Advertisement
Display Screens
Power-On Screen
General Status
Screen
If you press the Scroll button several times, you will see the
following displays successively.
When you power on the ProMark 500, the Magellan
Professional logo appears on the screen. It is displayed until
the ProMark 500 has completed its auto-test (this takes
about 30 seconds).
Then the General Status screen is displayed.
An example of General Status screen is shown below.
[1]
[5]
[6]
[9]
This screen displays the following information:
•
: Satellite icon [1] (always displayed).
• Number of satellites tracked [2].
• Position solution status [3]:
– AUTO: Autonomous GPS position
– FLOAT: Float solution
– FIXED: Fixed solution (RTK is operational)
– BASE: This ProMark 500 is configured as a base.
• Number of satellites used [4]: Number of satellites
involved in the position processing, regardless of the
current position solution status.
[2]
[3]
[10]
[11]
[12] [13]
[4]
[8]
[7]
9
Advertisement
Table of Contents
