System Settings; The Menu Screen - Magellan MiVue 6 Series Quick Start Manual

System settings

The Menu screen

Tap to access the Menu screen.
Button Description
Plays the recorded videos and photos.
File
For more information on playback see the "Playback mode"
Playback
section.
Camera Tap to enter Camera mode.
Sound
Enables sound in the recordings. The default setting is On.
Recording
Enables or disables WIFI. The default setting is On.
Refer to the "Setting up a WIFI connection" section in the
WIFI
User Manual to learn how to connect the recorder to your
smartphone.
Allows you to change the system settings of the device.
Settings
For more information see the "Advanced settings" section.
Note: While browsing the setting menus you can tap
screen or tap to return to the recording screen.
11
to return to the previous
Parking Mode
- Detection: When enabled the recorder will automatically start recording when it
detects movement or if an event happens in Parking mode.
- Detection Method: The options are G-Sensor, Motion and Both.
- Auto Entry: Sets the mode (Low, Medium, High or Manual) for the system to
enter Parking mode automatically.
- Motion Detection: The options are Low, Medium and High.
- G-Sensor Sensitivity: Sets the sensitivity level (Low, Medium or High) of the
Impact sensor that allows automatic triggering of the parking recording when the
recorder is in Parking mode.
- LED Indicator: The options are On and Off.
Video Recording
- Video Clip Length: Sets the length of each video clip for a continuous recording
(1 min, 3 min or 5 min).
- Video Resolution: Sets the resolution of the video.
- EV: Sets the proper exposure level (-1 ~ +1) to adjust the brightness of the image.
The default setting is 0.
- G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High) of
the Impact sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
- Stamps: Sets the information (Coordinates or G-Sensor) that will be displayed on
the recorded video.
- Text Stamp: This option allows you to display the customised information on the
recorded video.
12