Operating The Throttle; Operating The Choke - Toro 74667 Operator's Manual

Disengaging the Blade-Control
Switch (PTO)
Figure 23

Operating the Throttle

You can move the throttle control between F
S positions (Figure
LOW
Always use the F position when engaging the PTO.
AST
Figure 24
AST
24).

Operating the Choke

Use the choke to start a cold engine.
1. Pull up the choke knob to engage the choke
before using the key switch
Note:
Ensure that you fully engage the choke.
You may need to hold the knob up when you
use the key switch.
2. Push down the choke to disengage the choke
after the engine has started
g027538
and
1. O position
N
g187517
25
(Figure 25).
(Figure 25).
Figure 25
2. O position
FF
g008959