72" Mower Deck Belt Tension Adjustment
Plate Installation
1. Position the idler bushing onto the tension adjust-
ment plate (Fig. 758).
Fig 758
2. Insert the mounting bolt up through the idler bushing
and place the pulley onto the bushing (Fig. 759).
Fig 759
Z580/Z589 DFI Z Master Service Manual
MOWER DECKS
3. Install a washer and nut onto the pulley bolt securing
the pulley to the adjustment plate (Fig. 760).
6672a
4. Position 2 spacers onto the mower deck (Fig. 761).
6671a
Fig 760
6670a
Fig 761
6669a
7
7-59