Greasing The Transmission Couplers; Greasing The Pto Drive Belt Idler And Mower Deck Belt Idler - Toro 30070 Operator's Manual

2. Raise the rear of the machine and use jack stands to
support the machine.
3. Remove the rear wheel and tire assemblies.
4. Remove rear wheel grease cap. Lubricate the rear wheel
bearing (Figure 21).
5. Install the grease cap.
6. Install the rear wheel and tire assembly.
Note: Make sure the rear wheel grease caps are
removed before lubricating rear wheels.
Figure 21
Greasing the Transmission
Couplers
Service Interval: Every 250 hours
Lubricate the transmission couplers located in the back of
the machine (Figure 22).
Greasing the PTO Drive Belt
Idler and Mower Deck Belt Idler
Service Interval: Every 50 hours
Every 50 hours
Grease the idler pulley pivot(Figure 23).
22
Figure 22
Figure 23