Lubricating The Caster And Wheel Bearings; Greasing The Transmission Couplers; Greasing The Pto-Drive-Belt Idler And Mower-Deck-Belt Idler - Toro 30070 Operator's Manual

Lubricating the Caster and
Wheel Bearings
1. Lubricate the front caster wheel bearings and front
pivots (Figure 21).
2. Raise the rear of the machine and use jack stands to
support the machine.
3. Remove the rear wheel and tire assemblies.
4. Remove rear wheel grease cap. Lubricate the rear wheel
bearing (Figure 21).
5. Install the grease cap.
6. Install the rear wheel and tire assembly.
Note: Remove the rear-wheel grease caps before
lubricating the rear wheels.
Figure 21
Greasing the Transmission
Couplers
Service Interval: Every 250 hours
Lubricate the transmission couplers located in the back of
the machine (Figure 22).
Greasing the PTO-Drive-Belt
Idler and Mower-Deck-Belt
Idler
Service Interval: Every 50 hours
Every 50 hours
Grease the idler-pulley pivot
22
Figure 22
(Figure 23).
Figure 23