Delta C200 Series User Manual page 71

Call 1(800)985-6929 for Sales
Parameter
00-19 PLC Command Mask
Source of Master Frequency
00-20
Command（AUTO）
Source of the Operation
00-21
Command （AUTO）
00-22 Stop Method
00-23 Control of Motor Direction
Memory of Frequency
00-24
Command
00-25 User Defined Characteristics
00-26 Max. User Defined Value
00-27 User Defined Value
00-28
Reserved
00-29 LOCAL/REMOTE Selection
Source of the Master
Frequency Command
00-30
（HAND）
Call 1(800)985-6929 for Sales
deltaacdrives.com
Chapter 10 Summary of Parameter Settings|C200 Series
Explanation
Bit 0: Control command by PLC force contro
Bit 1: Frequency command by PLC force contro
0: Digital keypad
1: RS-485 serial communication
2: External analog input (Pr.03-00)
3: External UP/DOWN terminal
4: Reserved
5: Reserved
6: CANopen communication
7: Digital keypad potentiometer
0: Digital keypad
1: External terminals. Keypad STOP disabled.
2: RS-485 serial communication. Keypad STOP
3: CANopen communication card
0: Ramp to stop
1: Coast to stop
0: Enable forward/reverse
1: Reverse disable
2: Forward disable
Read only
Bit 0~3: user define on decimal place
Bit 4~15: user define on unit
0: Disable
0~65535 (when Pr.00-25 set to no decimal place)
0.0~6553.5 (when Pr.00-25 set to 1 decimal place)
0.0~655.35 (when Pr.00-25 set to 2 decimal place)
0.0~65.535 (when Pr.00-25 set to 3 decimal place)
Read only
0: Standard HOA function
1: Switching Local/Remote, the drive stops
2: Swithcing Local/Remote, the drive runs as the
3: Swithcing Local/Remote, the drive runs as the
4: Swithcing Local/Remote, the drive runs as
0: Digital keypad
1: RS-485 serial communication
2: External analog input (Pr.03-00)
3: External UP/DOWN terminal
4: Reserved
5: Reserved
6: CANopen communication
7: Digital keypad potentiometer
deltaacdrives.com
Settings
disabled.
0000b: no decimal place
0001b: one decimal place
0010b: two decimal place
0011b: three decimal place
000xh: Hz
001xh: rpm
002xh: %
003xh: kg
REMOTE setting for frequency and operation
status
LOCAL setting for frequency and operation status
LOCAL setting when switch to Local and runs as
REMOTE setting when switch to Remote for
frequency and operation status.
10-3
sales@deltaacdrives.com
Factory
Setting
l
Read
l only
0
0
0
0
Read
only
0
0
Read
Only
0
sales@deltaacdrives.com