Delta C200 Series User Manual page 256

Call 1(800)985-6929 for Sales
Display on
KPE-LE02
Fault
Y-delta connect
Fault
Dec. Energy back
Fault
Over slip error
Fault
U phase lacked
Fault
V phase lacked
Fault
W phase lacked
Fault
Guarding T-out
Fault
Heartbeat T-out
Fault
SYNC T-out
Fault
Can bus off
Fault
Can bus Index Err
Call 1(800)985-6929 for Sales
deltaacdrives.com
Display on
KPC-CC01
Y-connection/Δ-connection switch error
Corrective Actions:
ydc
1. Check the wiring of the Y-connection/Δ-connection
2. Check the parameters settings
When Pr.07-13 is not set to 0 and momentary power off or power cut, it
will display dEb during accel./decel. stop.
dEb
Corrective Actions:
1. Set Pr.07-13 to 0
2. Check if input power is stable
It will be displayed when slip exceeds Pr.05-26 setting and time
exceeds Pr.05-27 setting.
oSL
Corrective Actions:
1. Check if motor parameter is correct (please decrease the load if
overload
2. Check the settings of Pr.05-26 and Pr.05-27
Output phase loss (Phase U)
oPL1
Output phase loss (Phase V)
oPL2
Output phase loss (Phase W)
oPL3
CPU trap error
CGdE
CANopen guarding error
CHbE
CANopen heartbeat error
CSYE
CANopen synchronous error
CbFE
CANopen bus off error
CIdE
deltaacdrives.com
Chapter 12 Warning Codes|C200 Series
Descriptions
12-10
sales@deltaacdrives.com
sales@deltaacdrives.com