Table of Contents
Advertisement
Call 1(800)985-6929 for Sales
Content
4. Exception response:
The AC motor drive is expected to return a normal response after receiving command messages
from the master device. The following depicts the conditions when no normal response is replied to
the master device.
Call 1(800)985-6929 for Sales
deltaacdrives.com
Chapter 11 Description of Parameter Settings|C200 Series
Address
2103H
Output frequency (H)
2104H
Output current (AXX.X.X)
2105H
DC-BUS Voltage (UXXX.X)
2106H
Output voltage (EXXX.X)
2107H
Current step number of Multi-Step Speed Operation
2108H
Reserved
2109H
Counter value
210AH
Power Factor Angle (XXX.X)
210BH
Output Torque (%)
210CH
Actual motor speed (rpm)
210DH
Number of PG feed back pulses
210FH
Power output (X.XXX)
2116H
Multi-function display (Pr.00-04)
211BH
Max. opeartion frequency (Pr.01-00) or Max. user defined value
(Pr.00-26)
2200H
Display output current (A)
2201H
Display counter value of TRG terminal (c)
2202H
Display actual output frequency (H)
2203H
Display DC-BUS voltage (u)
2204H
Display output voltage of U, V, W (E)
2205H
Display output power angle of U, V, W (n)
2206H
Display actual motor speed kW of U, V, W (P)
2207H
Display motor speed in rpm estimated by the drive or encoder
feedback (r00: positive speed, -00: negative speed)
2208H
Display positive/negative output torque in %, estimated by the
drive (t0.0: positive torque, -0.0: negative torque)
220AH
Display PID feedback value after enabling PID function in % (b)
220BH
Display signal of AVI analog input terminal, 0-10V corresponds
to 0-100% (1.)
220CH
Display signal of ACI analog input terminal, 4-V20mA/0-10V
corresponds to 0-100% (2.)
220DH
Display signal of AUI analog input terminal, -10V~10V
corresponds to -100~100% (3.)
220EH
Display the IGBT temperature of drive power module in
220FH
Display the temperature of capacitance in
2210H
The status of digital input (ON/OFF), refer to Pr.02-12
2211H
The status of digital output (ON/OFF), refer to Pr.02-18
2212H
Display the multi-step speed that is executing (S)
2213H
The corresponding CPU pin status of digital input (d.)
2214H
The corresponding CPU pin status of digital output (O.)
2218H
Position command tracing error (P.)
2219H
Display times of counter overload (0.00~100.00%)
221AH
Display GFF in % (G.)
221BH
Display DCbus voltage ripples (Unit: Vdc) (r.)
221CH
Display PLC register D1043 data (C)
221DH
Display Pole of Permanent Magnet Motor
221EH
User page displays the value in physical measure
221FH
Output Value of Pr.00-05
2222H
Fan speed of the drive
2223H
Control mode of the drive 0: speed mode 1: torque mode
2224H
Carrier frequency of the drive
11-127
deltaacdrives.com
sales@deltaacdrives.com
Function
o
C (i.)
sales@deltaacdrives.com
o
C (c.)
Hide quick links:
Advertisement
Table of Contents
