Delta C200 Series User Manual page 59

Intelligent vector control drive
Table of Contents

Advertisement

Call 1(800)985-6929 for Sales
Chapter 7 Optional Accessories |C200 Series
USB/RS-485 Communication Interface IFD6530
Warning
Please thoroughly read this instruction sheet before installation and putting it into use.
The content of this instruction sheet and the driver file may be revised without prior notice. Please
consult our distributors or download the most updated instruction/driver version at
http://www.delta.com.tw/product/em/control/cm/control_cm_main.asp
1. Introduction
IFD6530 is a convenient RS-485-to-USB converter, which does not require external power-supply and
complex setting process. It supports baud rate from 75 to 115.2kbps and auto switching direction of data
transmission. In addition, it adopts RJ-45 in RS-485 connector for users to wire conveniently. And its tiny
dimension, handy use of plug-and-play and hot-swap provide more conveniences for connecting all
DELTA IABU products to your PC.
Applicable Models: All DELTA IABU products.
(Application & Dimension)
2. Specifications
Power supply
Power consumption
Isolated voltage
Baud rate
RS-485 connector
USB connector
Compatibility
Max. cable length
Support RS-485 half-duplex transmission
RJ-45
Call 1(800)985-6929 for Sales
deltaacdrives.com
No external power is needed
1.5W
2,500VDC
75, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
RJ-45
A type (plug)
Full compliance with USB V2.0 specification
RS-485 Communication Port: 100 m
PIN
Description
1
Reserved
2
Reserved
3
4
7-18
deltaacdrives.com
GND
SG-
sales@deltaacdrives.com
PIN
Description
5
SG+
6
GND
7
Reserved
8
+9V
sales@deltaacdrives.com

Advertisement

Table of Contents
loading

Table of Contents