Delta C200 Series User Manual page 70

Call 1(800)985-6929 for Sales
Chapter 10 Summary of Parameter Settings|C200 Series
Parameter
Coefficient Gain in Actual
00-05
Output Frequency
00-06 Software Version
Parameter Protection
00-07
Password Input
Parameter Protection
00-08
Password Setting
00-09
Reserved
00-10 Control Mode
00-11 Control of Speed Mode
00-12 Reserved
00-13 Torque Mode Control
00-14 Reserved
00-15
Reserved
00-16 Load Selection
00-17 Carrier Frequency
00-18 Single or Three-phase setting
Call 1(800)985-6929 for Sales
deltaacdrives.com
Explanation
14: Display the temperature of IGBT in oC (i.)
15: Display the temperature of capacitance in oC
16: The status of digital input (ON/OFF) (i)
17: The status of digital output (ON/OFF) (o)
18: Multi-step speed (S)
19: The corresponding CPU pin status of digital
20: The corresponding CPU pin status of digital
21~24: Reserved
25: Overload count (0.00~100.00%) (h.)
26: Ground Fault GFF (Unit :%)(G.)
27: DC Bus voltage ripple (Unit: Vdc) (r.)
28: Display PLC data D1043 (C)
29: Reserved
30: Display output of user defined (U)
31: Display Pr.00-05 user Gain(K)
32~34: Reserved
35: Control Mode display: 0= Speed control mode
(SPD), 1= torque control mode (TQR) (t.)
36: Present operating carrier frequency of drive
0~160.00
Read-only
0～65535
0~3: the times of password attempts
0 ~ 65535
0: No password protection / password is entered
1: Parameter is locked
0: Speed mode
1: Reserved
2: Torque mode
0: VF (IM V/f control)
1: VFPG (IM V/f control+ Encoder)
2: SVC(IM Sensorless vector control)
3: FOCPG (IM FOC vector control+ encoder)
4: Reserved
5: Reserved
6: PM Sensorless (PM field oriented sensorless
0: TQCPG（IM Torque control + Encoder）
1: Reserved
2: Reserved
0: Normal load
1: Heavy load
Normal load: 1-15HP
Heavy load: 1-15HP
0: 3-phase
1: 1-phase
deltaacdrives.com
Settings
(c.)
input (d.)
output (0.)
(Hz) (J.)
correctly (Pr00-07)
vector control)
10-2
sales@deltaacdrives.com
Factory
Setting
0
#.#
0
0
0
0
0
0
8
2
Read
only
sales@deltaacdrives.com