Call 1(800)985-6929 for Sales
Description of the Digital Keypad KPE-LE02
RUN Key
Start AC drive
operation.
STOP/RESET
Stops AC drive operation and reset the drive
after fault occurred.
Status Display
1
Display the driver's current status.
2
LED Display
Indicates frequency, voltage, current, user
defined units and etc.
3
Potentiometer
For master Frequency setting.
4
UP and DOWN Key
Set the parameter number and changes the numerical data, such as Master Frequency.
Display Message
Call 1(800)985-6929 for Sales
deltaacdrives.com
Chapter 9 Digital Keypad
1
2
4
Displays the AC drive Master Frequency.
Displays the actual output frequency at terminals U/T1, V/T2, and W/T3.
User defined unit (where U = F x Pr.00.05)
Displays the output current at terminals U/T1, V/T2, and W/T3.
Displays the AC motor drive forward run status.
Displays the AC motor drive reverse run status.
The counter value (C).
Displays the selected parameter.
Displays the actual stored value of the selected parameter.
deltaacdrives.com
Chapter 9 Digital Keypad
3
MODE
Change between different display mode.
ENTER
Used to enter/modify programming
parameters
Descriptions
9-1
sales@deltaacdrives.com
|C200
sales@deltaacdrives.com