Delta C200 Series User Manual page 279

Call 1(800)985-6929 for Sales
Display
Fault
oL
Inverter oL
Fault Fault
EoL1 EoL2
Thermal relay 1 Thermal relay 2
Fault
EoL2
Thermal relay 2
Fault Fault
EoL2 oH3
Thermal relay 2 Motor over heat
Fault Fault
ot1 EoL2
Thermal relay 2 Over torq ue 1
Fault Fault
EoL2 ot2
Over torq ue 2 Thermal relay 2
Fault Fault
EoL2 uC
Thermal relay 2 Under to rque 1
Fault Fault
EoL2 cF1
EEPROM write Err Thermal relay 2
Fault Fault
cF2 EoL2
EEPROM read Err Thermal relay 2
Fault Fault
cd1 EoL2
Ias sensor Err Thermal relay 2
Call 1(800)985-6929 for Sales
deltaacdrives.com
Fault code
Overload. The AC motor drive detects
excessive drive output current.
NOTE: The AC motor drive can
0015H
withstand up to 150% of the rated
current
for a maximum of 60 seconds.
0016H Electronics thermal relay 1 protection
0017H Electronics thermal relay 2 protection
Motor overheating
The AC motor drive detects that the
0018H
internal temperature exceeds
Pr.06-30 (PTC level)
These two fault codes will be displayed
when output current exceeds
001AH
the over-torque detection level (Pr.06.07
or Pr.06.10) and exceeds
over-torque detection(Pr.06.08 or
001BH
Pr.06.11) and it is set 2 or 4 in
Pr.06-06 or Pr.06-09.
001CH Low current
Internal EEPROM can not be
001EH
programmed.
001FH Internal EEPROM can not be read.
0021H U-phase error
deltaacdrives.com
Chapter 13 CANopen Overview |C200 Series
Description
13-22
sales@deltaacdrives.com
CANopen
CANopen fault
fault code register
(bit 0~7)
2310H 1
2310H 1
2310H 1
FF20H 1
8311H 3
8311H 3
8321H 1
5530H 5
5530H 5
FF04H 1
sales@deltaacdrives.com