Delta C200 Series User Manual page 317

Call 1(800)985-6929 for Sales
Mnemonic
Output coil
OUT
Operand
Output the logic calculation result before the OUT command to specific device.
Motion of coil contact:
Operation
result
Ladder diagram:
Example
Mnemonic
Latch (ON)
SET
Operand
When the SET command is driven, its specific device is set to be "ON," which will
keep "ON" whether the SET command is still driven. You can use the RST command
to set the device to "OFF".
Ladder diagram:
Example
Mnemonic
Clear the contacts or the registers
RST
Operand
When the RST command is driven, motion of its specific device is as follows:
When the RST command is not driven, motion of its specific device is unchanged.
Ladder diagram
Example
Call 1(800)985-6929 for Sales
X0~X17 Y0~Y17
－
Coil
FALSE Off
TRUE On
X1
X0
X0~X17 Y0~Y17
－
X0
Y0
SET
X0~X17 Y0~Y17
－
Device
Y, M Coil and contact will be set to "OFF".
Present values of the timer or counter will be set to 0, and the coil
T, C
and contact will be set to "OFF."
The content value will be set to 0.
D
deltaacdrives.com
Function
M0~M799 T0~159
OUT command
A contact
(normally open)
Non-continuity
Continuity
Command code: Operation:
LD
Y1
AND
OUT
Function
M0~M799 T0~159
Command code: Operation:
LD
Y1
AN
SET
Function
M0~M799 T0~159
Status
Command code: Operation:
LD
14-32
deltaacdrives.com
sales@deltaacdrives.com
Chapter 14 PLC Function |C200 Series
C0~C79
－ －
Contact
B contact
(normally closed)
Continuity
Non-continuity
X0 Load contact B of X0
Connect to contact A of
X1
X1 in series
Drive Y1 coil
Y1
C0~C79
－ －
X0 Load contact A of X0
Connect to contact B of
Y0
Y0 in series
Y1 latch (ON)
Y1
C0~C79
X0 Load contact A of X0
sales@deltaacdrives.com
D0~D399
－
D0~D399
－
D0~D399