Delta C200 Series User Manual page 177

Call 1(800)985-6929 for Sales
Settings Read only
Accumulative Watt Per Second of Motor in High Word (W-sec)
Settings Read only
Accumulative Watt-hour of Motor (W-Hour)
Settings Read only
Accumulative Watt-hour of Motor in Low Word (KW-Hour)
Settings Read only
Accumulative Watt-hour of Motor in High Word (KW-Hour)
Settings Read only
Pr.05-26~05-29 records the amount of power consumed by motors. The accumulation begins
when the drive is activated and record is saved when the drive stops or turns OFF. The amount of
consumed watts will continue to accumulate when the drive activate again. To clear the
accumulation, set Pr.00-02 to 5 then the accumulation record will return to 0.
Accumulative Motor Operation Time (Min)
Settings 00~1439
Accumulative Motor Operation Time (day)
Settings 00~65535
Pr. 05-31 and Pr.05-32 are used to record the motor operation time. To clear the operation time, set
Pr.05-31 and Pr.05-32 to 00. Operation time shorter than 60 seconds will not be recorded.
Induction Motor (IM) and Permanent Magnet Motor Selection
Settings 0: Induction Motor
Full-load current of Permanent Magnet Motor
Settings 0.00~655.35 Amps
Rated Power of Permanent Magnet Motor
Settings 0.00~655.35 kW
Rated speed of Permanent Magnet Motor
Call 1(800)985-6929 for Sales
deltaacdrives.com
1: Permanent Magnet Motor
deltaacdrives.com
Chapter 11 Description of Parameter Settings|C200 Series
11-78
sales@deltaacdrives.com
Factory Setting: #.#
Factory Setting: #.#
Factory Setting: #.#
Factory Setting: #.#
Factory Setting: #.#
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0.00
Factory Setting: 0.00
sales@deltaacdrives.com