Delta C200 Series User Manual page 156

Call 1(800)985-6929 for Sales
10 9 8 7 6 5
-V
10 9 8 7 6 5
-V
10 9 8 7 6 5
-V
Call 1(800)985-6929 for Sales
F requency
60Hz
54Hz
4 3 2 1
1 2 3 4 5 6 7 8 9 10
60Hz
F requency
60Hz
54Hz
4 3 2 1
1 2 3 4 5 6 7 8 9 10
60Hz
F requency
60Hz
54Hz
4 3 2 1
1 2 3 4 5 6 7 8 9 10
60Hz
deltaacdrives.com
Chapter 11 Description of Parameter Settings|C200 Series
Pr.00-21=0 (Dgit al keypad control and d run in F WD direction)
Analog Positive Voltage Input Bias (AUI) = 10%
Pr.03-05
Pr.03-07~03-09 (Positive/ Negat ive Bias Mode)
0: No bias
1: Lower than or equal t o bias
2: Greater than or equal t o bias
3: T he absolute value of the bias voltage
while serving as the cent er
4: Serve bias as the center
V
(Analog F requency Command f or Reverse Run)
Pr.03-10
0: Negat ive frequency is not valid.
F orward and reverse run is controlled
by digital keypad or ext ernal terminal.
1: Neagt ive frequency is valid. Posit ive
f requency = forw ard run; negative
f requency = reverse run. Direction
can not be switched by digit al keypad or
external t eriminal control.
Pr. 00-13 Analog Posit ive Input Gain (AUI )= 100%
Pr. 03-14 Analog Negative Input Gain (AUI )= 100%
Pr.00-21=0 (Dgit al keypad control and d run in F WD direct ion)
Analog Posit ive Volt age Input Bias (AUI ) = 10%
Pr.03-05
Pr.03-07~03-09 (Positive/ Negat ive Bias Mode)
0: No bias
1: Lower t han or equal to bias
2: Great er t han or equal to bias
3: T he absolut e value of the bias volt age
while serving as t he center
4: Serve bias as t he cent er
V
(Analog F requency Command f or Reverse Run)
Pr.03-10
0: Negat ive f requency is not valid.
F orward and reverse run is cont rolled
by digit al keypad or external terminal.
1: Neagt ive f requency is valid. Positive
frequency = f orward run; negative
frequency = reverse run. Direction
can not be switched by digit al keypad or
ext ernal teriminal cont rol.
Pr.00-13 Analog Posit ive I nput Gain (AUI )= 100%
Pr.03-14 Analog Negat ive Input Gain (AU I)= 100%
Pr. 00-21=0 (Digital keypad control and run in F WD direct ion )
Pr. 03-05 Analog Positive Voltage I nput Bias (AUI ) = 10%
Pr. 03-07~03-09 (Posit ive/Negative Bias Mode)
0: No bias
Lower t han or equal to bias
1:
2: Great er t han or equal to bias
3: T he absolut e value of the bias volt age
while serving as t he cent er
4: Serve bias as t he cent er
V
Pr. 03-10 (Analog F requency Command for Reverse Run)
0: Negative frequency is not valid.
F orward and reverse run is cont rolled
by digit al keypad or ext ernal t erminal.
1: Neagtive frequency is valid. Posit ive
frequency = f orward run; negat ive
frequency = reverse run. Direct ion
can not be swit ched by digital keypad or
external teriminal control.
Pr. 00-13 Analog Positive Input Gain (AUI)= 100%
Pr. 03-14 Analog Negative I nput Gain (AUI )= 100%
11-57
deltaacdrives.com
sales@deltaacdrives.com
sales@deltaacdrives.com