Delta C200 Series User Manual page 69

Call 1(800)985-6929 for Sales
Chapter 10 Summary of Parameter Settings
This chapter provides summary of parameter settings for user to gather the parameter setting ranges,
factory settings and set parameters. The parameters can be set, changed and reset by the digital keypad.
NOTE
1） : the parameter can be set during operation
2） For more detail on parameters, please refer to Ch11 Description of Parameter Settings.
00 Drive Parameters
IM: Induction Motor; PM: Permanent Magnet Motor
NOTE
Parameter
Identity Code of the AC Motor
00-00
Drive
Display AC Motor Drive
00-01
Rated Current
00-02 Parameter Reset
00-03 Start-up Display Selection
Content of Multi-function
00-04
Display
Call 1(800)985-6929 for Sales
deltaacdrives.com
Chapter 10 Summary of Parameter Settings|C200 Series
Explanation
2:230V, 04kW
4: 230V, 1HP
5: 460 V, 1HP
6: 230V,2HP
7: 460 V, 2HP
8: 230V, 3HP
9: 460 V, 3HP
10: 230V, 5HP
11: 460 V, 5HP
12: 230V, 7.5HP
13: 460 V, 7.5HP
14: 230V, 10HP
15: 460V, 10HP
93: 460V, 5HP（4kW）
Display by models
0: No function
1: Read only
5: Reset KWH display to 0
6: Reset PLC
7: Reset CANopen Index (Slave)
8: keypad lock
9: All parameters are reset to factory settings(base
10: All parameters are reset to factory settings
0: F (frequency command)
1: H (output frequency)
2: U (multi-function display, see Pr.00-04)
3: A (output current)
0: Display output current (A)
1: Display counter value (c)
2: Display actual output frequency (H.)
3: Display DC-BUS voltage (v)
4: Display output voltage (E)
5: Display output power angle (n)
6: Display output power in kW (P)
7: Display actual motor speed rpm (r)
8: Display estimate output torque % (t)
9: Reserved
10: Display PID feedback in % (b)
11: Display AVI in % (1.)
12: Display ACI in % (2.)
13: Display AUI in % (3.)
deltaacdrives.com
Settings
frequency is 50Hz)
(base frequency is 60Hz)
10-1
sales@deltaacdrives.com
Factory
Setting
Read
only
Read
only
0
0
3
sales@deltaacdrives.com