Delta C200 Series User Manual page 255

Call 1(800)985-6929 for Sales
Display on
KPE-LE02
Fault
ACI loss
Fault
External fault
Fault
Emergency stop
Fault
Base block
Fault
Password error
Fault
PC err command
Fault
PC err address
Fault
PC err data
Fault
PC slave fault
Fault
PC time out
Fault
PU time out
Fault
Braking fault
Call 1(800)985-6929 for Sales
deltaacdrives.com
Display on
KPC-CC01
ACI loss
Corrective Actions:
ACE
1. Check the ACI wiring
Check if the ACI signal is less than 4mA
External Fault
Corrective Actions:
EF
1. Input EF (N.O.) on external terminal is closed to GND. Output U, V,
W will be turned off.
2. Give RESET command after fault has been cleared.
Emergency stop
Corrective Actions:
EF1
1. When the multi-function input terminals MI1 to MI8 are set to
emergency stop and the AC motor drive stops output.
2. Press RESET after fault has been cleared.
Base Block
Corrective Actions:
bb
1. When the multi-function input terminals MI1 to MI8 are set to base
block and the AC motor drive stops output.
2. Press RESET after fault has been cleared.
Password is locked
Corrective Actions:
Pcod
Keypad will be locked. Turn the power ON after power OFF to re-enter the
correct password. See Pr.00-07 and 00-08.
Illegal function code
CE01
Corrective Actions:
Check if the function code is correct (function code must be 03, 06, 10, 63)
Illegal data length
CE02
Corrective Actions:
Check if the communication data length is correct.
Illegal data value
CE03
Corrective Actions:
Check if the data value exceeds max./min. value.
illegal communication address
CE04
Corrective Actions:
Check if the communication address is correct.
Communication time-out
CE10
Corrective Actions:
Check if the wiring for the communication is correct.
Keypad (KPVL-CC01) communication time-out
Corrective Actions:
CP10
1. Check if the wiring for the communication is correct
2. Check if there is any wrong with the keypad
Brake chopper fail
Corrective Actions:
bF
Press RESET key to correct it. If fault code is still displayed on the keypad,
please return to the factory.
deltaacdrives.com
Chapter 12 Warning Codes|C200 Series
Descriptions
12-9
sales@deltaacdrives.com
sales@deltaacdrives.com