Delta C200 Series User Manual page 243

Call 1(800)985-6929 for Sales
Speed Response of Flux Weakening Area
Settings 0: Disable
It is used to control the speed in the flux weakening area. The larger value is set in Pr.11-23, the
faster acceleration/deceleration will generate. In general, it is not necessary to adjust this
parameter.
Reserved
Reserved
Reserved
Max. Torque Command
Settings
The upper limit of torque command is 100%.
Calculation equation for motor rated torque:
Source of Torque Offset
Settings 0: Disable
This parameter is the source of torque offset.
When it is set to 3, source of torque offset would determine Pr.11-30 to Pr.11-32 by
When it is set to 3, the source of torque offset will regard Pr.11-30~11-32 by the multi-function
input terminals (MI) setting (31, 32 or 33).
Call 1(800)985-6929 for Sales
output tor que
0~150%
0~500%
motor rated torque:
T (
ω(rad/s) value= Pr.05-03。
1: Analog input (Pr.03-00)
2: Torque offset setting (Pr.11-29)
3: Control by external terminal (by Pr.11-30 to Pr.11-32)
deltaacdrives.com
Chapter 11 Description of Parameter Settings|C200 Series
Fl ux weakening cur ve
01-01
or
01-35
P ( W )
=
; P(W) value= Pr.05-02;
N . M )
ω
( rad / s )
π
×
RPM 2
=
rad / s
60
11-144
deltaacdrives.com
sales@deltaacdrives.com
11-21
or
11-22
100%
90%
frequency
Factory Setting: 65
Factory Setting: 100
Factory Setting: 0
sales@deltaacdrives.com